Order Products : sales@su-jiao.com

AMPLIFY™ TY 3352

Category:	MAH-g , Functional Polymer
Manufacturer:	The Dow Chemical Company
Trademark:	AMPLIFY™ TY
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	mRTAhg_AMPLIFY-TY-3352.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
AMPLIFY™ TY 3352 Functional Polymer is a maleic anhydride grafted (MAH) polymer. In tie layers for flexible packaging, AMPLIFY TY 3352 Functional Polymer promotes adhesion of Polyethylene to polystyrene (HIPS) and barrier polymers such as polyamide and ethylene vinyl alcohol (EVOH) and other polar substrates. AMPLIFY TY 3352 does not use or contain tris nonyl phenol phosphite (TNPP) antioxidant. Main Characteristics: Excellent adhesion to polyamide, EVOH and polystyrene For blown and cast film and sheet Complies with: U.S. FDA 21CFR175.105 Consult the regulations for complete details.

Message

AMPLIFY™ TY 3352 Functional Polymer is a maleic anhydride grafted (MAH) polymer. In tie layers for flexible packaging, AMPLIFY TY 3352 Functional Polymer promotes adhesion of Polyethylene to polystyrene (HIPS) and barrier polymers such as polyamide and ethylene vinyl alcohol (EVOH) and other polar substrates. AMPLIFY TY 3352 does not use or contain tris nonyl phenol phosphite (TNPP) antioxidant.

Main Characteristics:

Excellent adhesion to polyamide, EVOH and polystyrene

For blown and cast film and sheet

Complies with:

U.S. FDA 21CFR175.105

Consult the regulations for complete details.

General Information
Agency Ratings	FDA 21 CFR 175.105
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.940	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	5.0	g/10 min	ASTM D1238
MAH Graft Level ¹	Low		Internal Method

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	12.0	MPa
Break	9.03	MPa
Tensile Elongation (Break)	480	%	ASTM D638
Flexural Modulus	276	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	88.9	°C	ASTM D1525
Melting Temperature (DSC)	126	°C	Internal Method

Note Message
1 .	Low: <0.25 wt%, Medium 0.25-0.5, High >0.5 wt%

Resin Grade	Manufacturer	Category	Trademark
VITAMIDE® BR76BK6528	Jackdaw Polymers	Nylon 6	VITAMIDE®
Next Nylon 6 Prime Series NX-01BK	Next Polymers Ltd.	Nylon 6	Next Nylon 6 Prime Series
ALTECH® PP-H A 2030/100 GF30	ALBIS PLASTIC GmbH	PP Homopolymer	ALTECH® PP-H
Fainplast PVC R 220	Fainplast Compounds S.r.l	PVC, Rigid	Fainplast PVC
LUVOCOM® PEEK CLASSIX 7994 VP	Lehmann & Voss & Co.	PEEK	LUVOCOM®