Order Products : sales@su-jiao.com
Plavis® G15
| Category: | PI, TP , Thermoplastic Polyimide |
| Manufacturer: | Comco Nylon GmbH |
| Trademark: | Plavis® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mPsiac_PlavisG15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PLAVIS is a super engineering plastic. PLAVIS polyimide has a unique chemical structure with some of the highest properties availiable. Nitrogen bonded to 3 carbons is the critical part of the chain and imparts the plastic with remarkable features and benefits. DAELIM makes PLAVIS isostatic molded rods have uniform properties in all directions. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.49 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D1708 | ||
| Fracture, 23°C | 66.7 | MPa | ASTM D1708 |
| Fracture, 260°C | 34.3 | MPa | ASTM D1708 |
| Tensile Elongation 2 | ASTM D1708 | ||
| Fracture, 23°C | 5.0 | % | ASTM D1708 |
| Fracture, 260°C | 3.0 | % | ASTM D1708 |
| Coefficient of Friction 3 | 0.23 | ||
| Wear Rate | 33 | mm/sec |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow 4(23 to 260°C) | 4.5E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity 5(23°C) | 1.0E+12 - 1.0E+13 | ohms·cm | ASTM D257 |
| Note Message | |
|---|---|
| 1 . | Compression Molded |
| 2 . | Compression Molded |
| 3 . | Compression Molded |
| 4 . | Compression Molded |
| 5 . | Compression Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UNITIKA Nylon 66 ET2025 | UNITIKA Plastics Division | Nylon 66 | UNITIKA Nylon 66 |
| 3M™ Dyneon™ Fluoroplastic FEP 6322Z | 3M Advanced Materials Division | FEP | 3M™ Dyneon™ Fluoroplastic |
| AMTOPP BFP40 | Inteplast Group | PP, Unspecified | AMTOPP |
| COPYLENE® CM003P | Phillips 66 | PP Impact Copolymer | COPYLENE® |
| OmniLon™ PA6/6 GR33 HSh | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
