Order Products : sales@su-jiao.com
KMI PP KM-199IB
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | KMI PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mM3hQa_KMIPPKM199IB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KM-199IB is a high flow impact copolymer for injection molding application with excellent processability, stiffness-impact strength balance. It can be used for injection molding for large-size application due to its high flowability and as a base resin for PP composite material that is applicable to automobile exterior and interior Characteristics:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 80 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 95 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 30.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | < 50 | % | ASTM D638 |
| Flexural Modulus | 1620 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 49 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Distortion | 125 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® Clear G 120 Rnew | Arkema | Nylon, Unspecified | Rilsan® Clear |
| RheTech Polypropylene GC10P100-01 | RheTech, Inc. | PP, Unspecified | RheTech Polypropylene |
| Stanyl® TS200F10 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Gallonprene® GP540-7005C | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| LNP™ THERMOCOMP™ PCAF04FRHH compound | SABIC Innovative Plastics Europe | PC+ABS | LNP™ THERMOCOMP™ |
