Order Products : sales@su-jiao.com
Moplen EP5001
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | PolyMirae |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nzH4Ag_Moplen-EP5001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen EP5001 is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP5001 is a block copolymer suitable for industrial pipe and sewage system. Moplen EP5001 resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.30 to 0.50 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 31.4 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 8.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1670 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | No Break | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRE-ELEC® ABS 1410 | Premix Oy | ABS | PRE-ELEC® |
| Smooth-Cast® 310 | Smooth-On, Inc | PUR, Unspecified | Smooth-Cast® |
| AXELERON™ CX K-6923 NT A EXP1 | The Dow Chemical Company | HDPE | AXELERON™ |
| Innothane® IE-90A | Innovative Polymers, Inc. | TSU-Ether | Innothane® |
| O'Tech OM 7520 | O'Tech Corporation | PVC, Unspecified | O'Tech |
