Order Products : sales@su-jiao.com
Thermoset Plastics EP-236
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | m6L1Ak_Thermoset-Plastics-EP-236.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics EP-236 is an Epoxy; Epoxide (Epoxy) material. It is available in North America for casting or encapsulating. Important attributes of Thermoset Plastics EP-236 are:
Typical application of Thermoset Plastics EP-236: Wire & Cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.60 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.030 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 93 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 63.4 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 3.6 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 20 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 4.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | 3.70 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.010 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 1.0 | ||
| Resin | Mix Ratio by Weight: 1.0 | ||
| Thermoset Mix Viscosity (25°C) | 16000 | cP | ASTM D2393 |
| Demold Time (100°C) | 180 to 360 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sunny® PA66 HF200 | Guangdong Shunde Shunyan New Material Co., Ltd. | Nylon 66 | Sunny® |
| Thermoset Plastics 125 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| Vydyne® R530H BK02 | Ascend Performance Materials Operations LLC | Nylon 66 | Vydyne® |
| ALCUDIA® EBA CA-7420B | REPSOL | EBA | ALCUDIA® EBA |
| ASTALAC™ ABS TX52 | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
