Order Products : sales@su-jiao.com
Osterlene® MD-1.2-930
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lbCMm6_Osterlene-MD-1-2-930.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MD-1.2-930 is a medium density polyethylene resin designed for overwrap film applications. MD-1.2-930 exhibits good film optics and high stiffness. MD-1.2-930 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.2 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 32 | µm | |
| Secant Modulus - 1% Secant, MD (32 µm) | 331 | MPa | ASTM D882 |
| Tensile Strength - MD (Yield, 32 µm) | 24.8 | MPa | ASTM D882 |
| Tensile Elongation - MD (Break, 32 µm) | 400 | % | ASTM D882 |
| Dart Drop Impact 1(32 µm) | 60 | g | ASTM D1709 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (60°, 31.8 µm) | 90 | ASTM D2457 | |
| Haze (31.8 µm) | 7.0 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LXR585 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| TEREZ PMMA 5003 | TER HELL PLASTIC GMBH | Acrylic (PMMA) | TEREZ PMMA |
| ALTECH® PA6 A 2030/109 GF30 BK1128-12LS | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| EVALENE® PP PRJ1101 | JG Summit Petrochemical Corporation | PP Random Copolymer | EVALENE® PP |
| HiFill FR® PA6/6 FR NAT | Techmer Engineered Solutions | Nylon 66 | HiFill FR® |
