Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroelastomer FC 2178
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroelastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lEPdPI_3M-Dyneon-Fluoroelastomer-FC-2178.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 3M™ Dyneon™ Fluoroelastomer FC 2178 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2178 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| General Information |
|---|
| Additives Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.80 to 1.90 | g/cm³ | |
| State at Room Temperature | Solid |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Razamid® A121U GR20-50 | Razin™ Engineering Plastics | Nylon 66 | Razamid® |
| SABIC® HDPE PCG40053 | SABIC Americas, Inc. | HDPE | SABIC® HDPE |
| Spartech Polycom SCR2-1090 | Spartech Polycom | PS (HIPS) | Spartech |
| ENGAGE™ 8400 | The Dow Chemical Company | TPO (POE) | ENGAGE™ |
| PermaStat® 600 FR | RTP Company | ABS | PermaStat® |
