Order Products : sales@su-jiao.com
Lustran® ABS 720
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Styrolution |
| Trademark: | Lustran® ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lPKAv6_Lustran-ABS-720.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Lustran ABS 720 resin is a black, virgin injection molding grade of ABS (acrylonitrile butadiene styrene). It is supplied as a salt-and-pepper pellets with color concentrate 901802 black. Designed for molded drain, waste and vent (DWV) fittings, Lustran ABS 720 resin in color 901802 black meets or exceeds ASTM D 3965 3-2-2-2-2 cell class requirements for ASTM F 628 and D 2661. It is also listed under NSF Standard 14 and CSA Standard B181.1. As with any product, use of Lustran ABS 720 resin in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Specific Volume | 0.950 | cm³/g | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 220°C/10.0 kg | 6.5 | g/10 min | ASTM D1238 |
| 230°C/10.0 kg | 10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2000 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 37.2 | MPa | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, 3.18 mm | 130 | J/m | ASTM D256 |
| 23°C, 3.18 mm | 290 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed, 6.35 mm) | 104 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 - 93.3 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | < 0.050 | % | |
| Suggested Max Regrind | 40 | % | |
| Processing (Melt) Temp | 232 - 246 | °C | |
| Mold Temperature | 43.3 - 65.6 | °C | |
| Injection Rate | Moderate-Fast |
| Injection instructions |
|---|
| Injection Pressure: Moderately High to HighCushion: Minimum |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 201 D TFE 10 | RTP Company | Nylon 612 | RTP |
| VAMPAMID HT 1526 V0 | Vamp Tech | PPA | VAMPAMID |
| Borealis PE FS1470 | Borealis AG | HDPE | Borealis PE |
| Colorite 11 Series 8311 | Colorite Polymers | PVC, Unspecified | Colorite 11 Series |
| Evoprene™ GC 5692 | AlphaGary | SEBS | Evoprene™ GC |
