Europrene® N 3345 GRN

Category:	NBR , Acrylonitrile Butadiene Rubber
Manufacturer:	Versalis S.p.A.
Trademark:	Europrene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	kX04ro_Europrene-N-3345-GRN.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Europrene® N 3345 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 3345 GRN is characterised by excellent processability and tear resistance at high temperature. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. All injection moulding applications (low mould fouling).

Message

Europrene® N 3345 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process.

Europrene® N 3345 GRN is characterised by excellent processability and tear resistance at high temperature. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process.

All injection moulding applications (low mould fouling).

General Information
Additive	Antioxidant
Features	Antioxidant Fast Cure Fuel Resistant Good Processability Good Tear Strength Low Temperature Flexibility Oil Resistant
Appearance	Yellow
Forms	Bale
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Mooney Viscosity (ML 1+4, 100°C)	45	MU	ASTM D1646
Acrylonitrile Content	33.0	wt%	ASTM D3533
Ash Content	< 0.5	wt%	ASTM D5667
Organic Acid	< 0.5	wt%	ASTM D5774
Soap	< 0.6	wt%	ASTM D5774
Volatile Matter	< 0.70	wt%	ASTM D5668

Resin Grade	Manufacturer	Category	Trademark
Braskem PP RP 144	Braskem	PP Random Copolymer	Braskem PP
Cawiton® MT940	Wittenburg B.V.	SEBS	Cawiton®
K-vinyl 70 Deg C Rating Insulation (80-Wet)	Technovinyl Polymers India Ltd.	PVC, Unspecified	K-vinyl
Plenco 04301 (Compression)	Plastics Engineering Co.	Phenolic	Plenco
Alpha PVC 2222C-78	Mexichem Specialty Compounds Inc.	PVC, Unspecified	Alpha PVC