Sarlink® TPE ME-2365B (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
The Sarlink ME-2300 Series is a high performance thermoplastic elastomer series, available in BLK, designed for automotive exterior molded applications. Sarlink ME-2365B is a medium hardness, low density, UV stabilized, high flow grade delivering excellent aesthetics and faster injection molding cycle times.

General Information
Features	Low Specific Gravity Sunlight Resistant Low density Light stabilization Good UV resistance Workability, good Fast molding cycle Good adhesion High liquidity Good chemical resistance Lubrication Excellent appearance Medium hardness
Uses	Application in Automobile Field Automotive exterior parts Car exterior decoration Rubber substitution
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.890	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	15	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ISO 868
Shore A, 1 second, injection molding	69	ISO 868
Shore A, 5 seconds, injection molding	65	ISO 868
Shore A, 15 seconds, injection molding	64	ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ISO 37
Transverse flow : 100% strain	1.70	MPa	ISO 37
Flow : 100% strain	2.00	MPa	ISO 37
Tensile Stress ²			ISO 37
Transverse flow : Fracture	10.5	MPa	ISO 37
Flow : Fracture	5.80	MPa	ISO 37
Tensile Elongation ³			ISO 37
Transverse flow : Fracture	880	%	ISO 37
Flow : Fracture	710	%	ISO 37
Tear Strength ⁴			ISO 34-1
Transverse flow	28	kN/m	ISO 34-1
Flow	27	kN/m	ISO 34-1
Compression Set ⁵			ISO 815
23°C, 22 hr	24	%	ISO 815
70°C, 22 hr	39	%	ISO 815
90°C, 70 hr	63	%	ISO 815

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air - Across Flow ⁶			ISO 188
110°C, 1008 hr	-9.8	%	ISO 188
100% strain 110°C, 1008 hr	13	%	ISO 188
125°C, 168 hr	-11	%	ISO 188
100% strain 125°C, 168 hr	15	%	ISO 188
Changes in tensile stress upon fracture in air- Transverse flow ⁷			ISO 188
110°C, 1008 hr	1.3	%	ISO 188
125°C, 168 hr	-1.3	%	ISO 188
Change in Shore Hardness in Air ⁸			ISO 188
Shao A, 110°C, 1008 hr	2.8		ISO 188
Shao A, 125°C, 168 hr	1.7		ISO 188

Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (200°C, 206 sec^-1)	134	Pa·s	ASTM D3835

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	199 - 210	°C
Middle Temperature	204 - 216	°C
Front Temperature	210 - 221	°C
Nozzle Temperature	216 - 227	°C
Processing (Melt) Temp	216 - 227	°C
Mold Temperature	35 - 66	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 120	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Note Message
1 .	Type 1, 510mm/min
2 .	Type 1, 510mm/min
3 .	Type 1, 510mm/min
4 .	B method, right angle specimen (without cut), 510mm/min
5 .	Type a
6 .	Type 1
7 .	Type 1
8 .	5 sec

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	k1VVxg_SarlinkTPEME2365BPRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Bergamid™ A70 G30 Black	PolyOne Corporation	Nylon 66	Bergamid™
BLUESTAR® POM BS270A	Beijing Ranger Chemical Co., Ltd.	Acetal (POM) Copolymer	BLUESTAR® POM
CoREZYN® COR30-DA-250	Interplastic Corporation	Polyester, TS	CoREZYN®
Kumho KTR KTR-401H	Korea Kumho Petrochemical Co., Ltd.	SBS	Kumho KTR
Sylvin 802-80 Clear 876	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin