Order Products : sales@su-jiao.com
Maxxam™ FR PP 301 NATL S-30
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Maxxam™ FR |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | it8XwL_Maxxam-FR-PP-301-NATL-S-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Maxxam™ FR flame-retardant polyolefin compounds and masterbatches meet stringent flammability performance requirements defined by industry agencies, including Underwriters Laboratories UL 94 V-2, V-0, and 5VA performance ratings. In addition, many compounds in the Maxxam FR portfolio offer elevated Relative Thermal Index (RTI) ratings. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.980 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 27 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 1.0 to 2.0 | % | |
| Across Flow | 1.0 to 2.0 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 29.0 | MPa | ASTM D638 |
| Flexural Modulus | 1210 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm, Injection Molded) | 21 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.18 mm) | 85.0 | °C | ASTM D648 |
| RTI Elec | UL 746 | ||
| 0.410 mm | 100 | °C | |
| 0.750 mm | 110 | °C | |
| 1.50 mm | 110 | °C | |
| 3.00 mm | 110 | °C | |
| RTI Imp | UL 746 | ||
| 0.410 mm | 90.0 | °C | |
| 0.750 mm | 105 | °C | |
| 1.50 mm | 105 | °C | |
| 3.00 mm | 115 | °C | |
| RTI Str | UL 746 | ||
| 0.410 mm | 100 | °C | |
| 0.750 mm | 110 | °C | |
| 1.50 mm | 110 | °C | |
| 3.00 mm | 120 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.750 mm | V-0 | ||
| 3.00 mm | V-0 | ||
| 0.400 mm | VTM-0 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | Type I, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1383 P-1 TFE 15 | RTP Company | PPS | RTP |
| Braskem PP HP 550R | Braskem | PP Homopolymer | Braskem PP |
| Hifax TYL 250X | LyondellBasell Industries | PP, Unspecified | Hifax |
| Jackdaw PC DR14NT6731 | Jackdaw Polymers | PC | Jackdaw PC |
| Moplen HP563S | PolyMirae | PP Homopolymer | Moplen |
