Order Products : sales@su-jiao.com

DJSilicone NE-345

Category:	Silicone , Silicone
Manufacturer:	DONGJUE SILICONE (NANJING) CO., LTD
Trademark:	DJSilicone
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	na1arb_DJSilicone-NE-345.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
This product adopts high quality raw materials and special ingredients, which makes it own the following properties: excellent high and low temperature resistance, physical, mechanical and electrical properties. This rubber has very good transparency and physical, mechanical properties. Modifying silicone rubber for molding uses vulcanizor DMDBH while modifying silicone rubber for extrusion uses vulcanizor DCBP.It is suitable for producing all kinds of silicone rubber tubes, special rubber strips, accessories for cables, and parts of other electrical equipments.

Message

This product adopts high quality raw materials and special ingredients, which makes it own the following properties: excellent high and low temperature resistance, physical, mechanical and electrical properties.

This rubber has very good transparency and physical, mechanical properties. Modifying silicone rubber for molding uses vulcanizor DMDBH while modifying silicone rubber for extrusion uses vulcanizor DCBP.It is suitable for producing all kinds of silicone rubber tubes, special rubber strips, accessories for cables, and parts of other electrical equipments.

General Information
Features	Good Electrical Properties High Clarity High Heat Resistance Low Temperature Resistant
Uses	Cable Jacketing Electrical Parts Tubing
Appearance	Translucent White
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.09 to 1.19	g/cm³	ASTM D1505

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	43 to 47		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Set	< 6	%	ASTM D412
Tensile Strength (Yield)	> 8.00	MPa	ASTM D412
Tensile Elongation (Break)	> 420	%	ASTM D412
Tear Strength	> 20.0	kN/m	ASTM D624

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+15	ohms·cm	ASTM D257
Dielectric Strength	> 20	kV/mm	ASTM D149

Resin Grade	Manufacturer	Category	Trademark
Ultramid® A3WG6 HRX	BASF Corporation	Nylon 66	Ultramid®
Bergamid™ A70 GK30 H NC132	PolyOne Corporation	Nylon 66	Bergamid™
ELITE™ 5815	The Dow Chemical Company	EPE	ELITE™
Paracril® AJ	INSA	NBR	Paracril®
Petrothene® NA952000	LyondellBasell Industries	LDPE	Petrothene®