Order Products : sales@su-jiao.com

Plastiglas Stonia®

Category:	Acrylic, Unspecified , Acrylic
Manufacturer:	Plastiglas de Mexico S.A de C.V.
Trademark:	Plastiglas
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ik4pN7_Plastiglas-Stonia-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Stonia® is an acrylic surface with veins that simulates natural onyx stone; non porous material, with high hardness and easy to maintain. It is highly hygienic because it does not allow fungus formation. Its easy maintenance allows the material to be one of the cleanest and brightest surfaces.

Applications:

Stonia is recommended for indoor applications only.

Decorative luminaries: walls, ceilings, hanging lamps.

Indoor and outdoor facades.

Lightened shelves.

Table covers in restrooms.

Table covers in bars and restaurants.

Table gardens and POP stands.

Interior partitions.

Decorative articles.

Characteristics:

Warm light transmission.

Esthetics.

Harmonize environments.

50% lighter than Onix stone (2.38 - 2.67 g/cm3).

Hygienic.

Moderate impact resistance.

Inert.

Easy to install.

Easy to maintain.

Flame retardant.

Easy to process.

Easy to add ttings.

General Information
Features	Cleanable Flame Retardant Fungus Resistant Good Processability High Hardness Medium Impact Resistance Non-Porous
Uses	Consumer Applications Counter Top Flatstocks Decorative Parts Displays Furniture Lighting Applications Lighting Fixtures Sheet
Appearance	Colors Available
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.42	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	74		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	2340	MPa	ASTM D638
Tensile Strength	42.1	MPa	ASTM D638
Tensile Elongation (Break)	2.7	%	ASTM D638
Flexural Strength	75.8 to 89.6	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact	69	J/m	ASTM D256
Gardner Impact	7.34	J	ASTM D3029

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	85.0	°C	ASTM D648
Continuous Use Temperature	75.0	°C	ASTM D794
Melting Temperature	60.0 to 82.2	°C

Resin Grade	Manufacturer	Category	Trademark
RJM SN602G30	RJM International, Inc.	Nylon 66	RJM
ALTECH® PA66 A 3040/100 GB40	ALBIS PLASTIC GmbH	Nylon 66	ALTECH® PA66
GLS PP ZN09	GLS Polymers Pvt. Ltd.	PP Homopolymer	GLS PP
GLAMIDE® T-401	TOYOBO America, Inc.	Nylon 6	GLAMIDE®
Latilub 66 Y/20	LATI S.p.A.	Nylon 66	Latilub