Order Products : sales@su-jiao.com

ALCUDIA® HDPE R4805D1

Category:	HDPE , High Density Polyethylene
Manufacturer:	REPSOL
Trademark:	ALCUDIA® HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	qYr5Sv_ALCUDIA-HDPE-R4805D1.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALCUDIA® R4805D1 is a low melt flow rate high density polyethylene with medium molecular weight distribution. It offers an optimum balance between mechanical and processing properties for production of tapes with high tensile strength at break. This product is specially formulated with a slip package. TYPICAL APPLICATIONS ALCUDIA® R4805D1 is designed for stretched tapes production based on blown film. It gives flexible tapes with high tenacity and low fibrillation tendency suitable for high speed textil lines: Iso Mayer textile applications Raschel knitted and woven fabrics. Twines and ropes Recommended melt temperature range from 210 to 230°C. Processing conditions should be optimised for each production line.

Message

ALCUDIA® R4805D1 is a low melt flow rate high density polyethylene with medium molecular weight distribution. It offers an optimum balance between mechanical and processing properties for production of tapes with high tensile strength at break. This product is specially formulated with a slip package.

TYPICAL APPLICATIONS
ALCUDIA® R4805D1 is designed for stretched tapes production based on blown film. It gives flexible tapes with high tenacity and low fibrillation tendency suitable for high speed textil lines:

Iso Mayer textile applications

Raschel knitted and woven fabrics.

Twines and ropes

Recommended melt temperature range from 210 to 230°C. Processing conditions should be optimised for each production line.

General Information
Additive	slip agent
Features	High tensile strength smoothness Workability, good Low liquidity Compliance of Food Exposure Medium wide molecular weight distribution
Uses	Twine Strap Rope Fabric
Agency Ratings	European food contact, not rated
Processing Method	Blow film

Physical	Nominal Value	Unit	Test Method
Density	0.948	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.56	g/10 min	ISO 1133

Extrusion	Nominal Value	Unit
Melt Temperature	180 - 230	°C

Extrusion instructions
Blow Up Ratio: 1.1 to 1.3

Resin Grade	Manufacturer	Category	Trademark
Sylvin 8627-45 Clear	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Exxtral™ Performance Polyolefin CMU101D	ExxonMobil Chemical	TPO	Exxtral™ Performance Polyolefin
Hostacom BB 1161 G C12773	LyondellBasell Industries	PP Copolymer	Hostacom
ESTOPLAST ZK 6220NN01	Ester Industries Ltd.	PC	ESTOPLAST ZK
KOPPS® S13A65BL	Kolon Plastics, Inc.	PPS	KOPPS®