Order Products : sales@su-jiao.com
Lotryl® 17BA04
| Category: | EBA , Ethylene Butyl Acrylate Copolymer |
| Manufacturer: | Arkema |
| Trademark: | Lotryl® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iiQlLD_Lotryl-17BA04.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LOTRYL® 17BA04 is a random copolymer of Ethylene and Butyl Acrylate produced by high-pressure radicalar polymerization process. Applications Due to the butyl acrylate content, LOTRYL® 17BA04 can be used for applications where softness, flexibility and polarity are required. Typical applications are extrusion coating, coextrusion and compounds. LOTRYL® 17BA04 can be used as tie layer in PP/PE coextrusion, in extrusion coating on many substrates, in compounds formulation and foams. It is also suitable for wires and cables application in HFFR formulations and SIOPLAST cross linkable compounds. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ISO 1183, ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.5 to 4.5 | g/10 min | ASTM D1238, ISO 1133 |
| n-Butyl Acrylate Content | 16.0 to 19.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 32 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 15.0 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Break, Compression Molded) | 700 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus (Compression Molded) | 45.0 | MPa | ASTM D790, ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 60.0 | °C | ISO 306/A, ASTM D1525 1 |
| Melting Temperature | 93.0 | °C | ISO 11357-3 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 to 170 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 170 | °C | |
| Cylinder Zone 4 Temp. | 170 | °C | |
| Die Temperature | 170 | °C |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 T 15 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| COPYLENE® CM120LN-01 | Phillips 66 | PP Impact Copolymer | COPYLENE® |
| EPO-TEK® OG653 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Lucky Enpla LAY8008L | Lucky Enpla Co LTD | ASA+PC | Lucky Enpla |
| AURUM® JCL3030 | Mitsui Chemicals, Inc. | PI, TP | AURUM® |
