Order Products : sales@su-jiao.com
Pinnacle PP 2199H
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Pinnacle Polymers |
| Trademark: | Pinnacle PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | iWYuTC_Pinnacle-PP-2199H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
100 MELT FLOW IMPACT COPOLYMER POLYPROPYLENE FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 2199H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This controlled rheology copolymer is intended for use in thin wall injection molded packaging, housewares and consumer products applications. Ulta High Melt Flow dramatically improves cycle-times without forfeiting properties. Contains nucleator and antistat. The 2199H product provides:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 100 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm, Injection Molded) | 20.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, 3.20 mm, Injection Molded) | 5.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(3.20 mm, Injection Molded) | 1070 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 4(23°C, 3.20 mm, Injection Molded) | 69 | J/m | ASTM D256 |
| Notched Izod Impact (Area) 5(23°C, 3.20 mm, Injection Molded) | 6.80 | kJ/m² | ASTM D256 |
| Gardner Impact 6(-30°C) | 24.0 | J | ASTM D5420 |
| Note Message | |
|---|---|
| 1 . | Type I, 51 mm/min |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 1.3 mm/min |
| 4 . | Type I |
| 5 . | Type I |
| 6 . | Method G, Geometry GC |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® STAMAX 60YM241 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® STAMAX |
| MTEGRITY™ LLDPE LL800 | M. Holland Company | LLDPE | MTEGRITY™ LLDPE |
| IROGRAN® A 92 E 4694 | Huntsman Corporation | TPU-Polyester | IROGRAN® |
| Lucent PC GPC-0202 20 | Lucent Polymers, Inc. | PC | Lucent PC |
| ALCOM® MED PS 2030 07001 | ALBIS PLASTIC GmbH | PS (GPPS) | ALCOM® MED PS |
