Order Products : sales@su-jiao.com
Elastocon® CLR30
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hsL1dT_ElastoconCLR30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® CLR30 is a transparent thermoplastic elastomer that has been developed for applications that require resilience, high strength properties and a good surface finish. Elastocon® CLR30 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR30 is supplied as ready to use pellets in 40 lb. quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 25 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.340 | MPa | ASTM D412 |
| Tensile Strength | 7.80 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 880 | % | ASTM D412 |
| Tear Strength | 21.9 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 171 - 177 | °C | |
| Middle Temperature | 177 - 193 | °C | |
| Front Temperature | 182 - 210 | °C | |
| Nozzle Temperature | 188 - 266 | °C | |
| Processing (Melt) Temp | 188 - 210 | °C | |
| Mold Temperature | 16 - 49 | °C | |
| Injection Rate | Slow | ||
| Back Pressure | 0.172 - 1.03 | MPa | |
| Screw Compression Ratio | 2.5:1.0 - 3.0:1.0 |
| Injection instructions |
|---|
| Elastocon® CLR30 thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 79 | °C | |
| Cylinder Zone 1 Temp. | 149 | °C | |
| Cylinder Zone 5 Temp. | 177 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polytech & Net XP 9200EN | Polytech & Net Gmbh | mLLDPE | Polytech & Net |
| Sasol Polymers PE HR411/06 | Sasol Polymers | LLDPE | Sasol Polymers PE |
| TEREZ PA 6.6 7500 GF 15 GK 15 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| KUBE PIR 30302 | KUBE Electronics AG | HDPE | KUBE PIR |
| LUVOCOM® 50-8779 | Lehmann & Voss & Co. | PC | LUVOCOM® |
