Order Products : sales@su-jiao.com
neogol® A70 2 Z005
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | API SpA |
| Trademark: | neogol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hKGV5N_neogolA702Z005.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
neogol®A70 2 Z005 is a polyolefin thermoplastic elastomer (TPO (POE)) product,. It can be processed by co-extrusion molding or injection molding and is available in Europe. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.980 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 140 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| -- | 5.50 | MPa | ASTM D638 |
| 100% strain | 3.00 | MPa | ASTM D638 |
| 300% strain | 3.60 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 950 | % | ASTM D638 |
| Abrasion Resistance | 140 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 33.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 72 hr | 18 | % | ASTM D395 |
| 70°C, 22 hr | 54 | % | ASTM D395 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 155 - 175 | °C | |
| Middle Temperature | 160 - 180 | °C | |
| Front Temperature | 160 - 180 | °C | |
| Nozzle Temperature | 165 - 190 | °C | |
| Mold Temperature | 25 - 40 | °C | |
| Injection Rate | Moderate-Fast |
| Note Message | |
|---|---|
| 1 . | With Notch |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TIPELIN® BS 520-14 | MOL Petrochemicals Co. Ltd. | HDPE | TIPELIN® |
| CompaMid® PA 6.6 HI | DimeLika Plast GmbH | Nylon 66 | CompaMid® |
| DURACON® SW-22 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer+PE | DURACON® |
| Laprene® 830000546 | SO.F.TER. SPA | SEBS | Laprene® |
| LUVOCOM® 1105-8726/GY | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
