Order Products : sales@su-jiao.com
HANWHA CLNA-8400
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Hanwha Chemical |
| Trademark: | HANWHA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hG9Dyo_HANWHA-CLNA-8400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hanwha CLNA-8400 is a linear low density polyethylene (LLDPE) produced by the UNIPOL process. It's molecular weight distribution is so broad that it offers an excellent processability and scorch stability. It can be used as base resin of silane-crosslinked low voltage cable insulation, high speed telephone cable insulation and high frequency coaxial inner skin. It combines excellent electrical properties with outstanding stress crack resistance. Applications: CLNA-8400 can be used as base resin of silane-crosslinked low voltage cable insulation, high speed telephone cable insulation and high frequency coaxial inner skin. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 10% Igepal, F0) | > 2000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 1 sec) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 17.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 800 | % | ASTM D638 |
| Aging | Nominal Value | Unit | |
|---|---|---|---|
| Retention of Tensile Elongation - 7 days (135°C) | > 90 | % | |
| Retention of Tensile Strength - 7 days (135°C) | > 90 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Elongation 1 | < 90 | % | IEC 60502 |
| Set - Permanent 2 | < 4.0 | % | IEC 60502 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | > 20 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | < 2.30 | ASTM D150 | |
| Dissipation Factor (1 MHz) | < 2.0E-4 | ASTM D150 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 160 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | Silane 0.8 phr |
| 2 . | Silane 0.8 phr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POPELEN RX-10000 | Lotte Chemical Corporation | PP Impact Copolymer | POPELEN |
| XIRAN® SF260 | Polyscope Polymers BV | SMA | XIRAN® |
| VALOX™ 315 resin | SABIC Innovative Plastics Europe | PBT | VALOX™ |
| Baytec® 352 (86A) | Covestro - PUR | TSU | Baytec® |
| UBE Nylon 1022B | UBE Engineering Plastics, S.A. | Nylon 6 | UBE Nylon |
