Order Products : sales@su-jiao.com
Makroblend® UT408
| Category: | PC+PET , Polycarbonate + PET |
| Manufacturer: | Covestro - Polycarbonates |
| Trademark: | Makroblend® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gtSE4H_Makroblend-UT408.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| (PC+PET) blend, unreinforced; UV-stabilized; impact modified; high flow; injection molding grade; good impact strength; dimensional stability and chemical resistance. Suitable for some food contact applications (contact Covestro for more information). |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.22 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (270°C/5.0 kg) | 20.0 | cm³/10min | ISO 1133 |
| Molding Shrinkage 1 | ISO 2577 | ||
| Across Flow | 0.60 to 0.80 | % | |
| Flow | 0.60 to 0.80 | % | |
| Water Absorption | ISO 62 | ||
| Saturation, 23°C | 0.50 | % | |
| Equilibrium, 23°C, 50% RH | 0.20 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2400 | MPa | ISO 527-2/1 |
| Tensile Stress | ISO 527-2/50 | ||
| Yield, 23°C | 59.0 | MPa | |
| Break, 23°C | 64.0 | MPa | |
| Tensile Strain (Yield, 23°C) | 5.5 | % | ISO 527-2/50 |
| Nominal Tensile Strain at Break (23°C) | 100 | % | ISO 527-2/50 |
| Flexural Modulus 2(23°C) | 2350 | MPa | ISO 178 |
| Flexural Stress 3 | ISO 178 | ||
| 23°C | 88.0 | MPa | |
| 3.5% Strain, 23°C | 71.0 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength 4 | ISO 7391 | ||
| -30°C | 10 | kJ/m² | |
| 23°C | 60 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 131 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 109 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 142 | °C | ISO 306/B120 |
| CLTE | ISO 11359-2 | ||
| Flow : 23 to 55°C | 7.0E-5 | cm/cm/°C | |
| Transverse : 23 to 55°C | 8.0E-5 | cm/cm/°C | |
| Thermal Conductivity 5(23°C) | 0.20 | W/m/K | ISO 8302 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | IEC 60093 |
| Volume Resistivity (23°C) | 1.0E+16 | ohms·cm | IEC 60093 |
| Electric Strength (23°C, 1.00 mm) | 34 | kV/mm | IEC 60243-1 |
| Relative Permittivity | IEC 60250 | ||
| 23°C, 100 Hz | 3.20 | ||
| 23°C, 1 MHz | 3.10 | ||
| Dissipation Factor | IEC 60250 | ||
| 23°C, 100 Hz | 1.3E-3 | ||
| 23°C, 1 MHz | 0.014 | ||
| Comparative Tracking Index (Solution A) | 375 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 600 bar |
| 2 . | 2.0 mm/min |
| 3 . | 2.0 mm/min |
| 4 . | Based on ISO 180-A, 3 mm |
| 5 . | Cross-flow |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom SCR7-7015F | Spartech Polycom | PC | Spartech |
| StarCLEAR CLR-1040 | STAR Thermoplastic Alloys & Rubbers, Inc. | TPE | StarCLEAR |
| Cadence™ ADD5 | Eastman Chemical Company | Copolyester | Cadence™ |
| Jampilen HP562R | Jam Polypropylene Company | PP Homopolymer | Jampilen |
| SCHULAFORM® 9 C | A. Schulman Europe | Acetal (POM) Copolymer | SCHULAFORM® |
