Order Products : sales@su-jiao.com
Vikalloy P40
| Category: | PMMA+PVC , Acrylic (PMMA) + PVC |
| Manufacturer: | Viking Polymers, LLC |
| Trademark: | Vikalloy |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HqbQfG_Vikalloy-P40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Vikalloy P40 is an acrylic acid (PMMA) PVC (PMMA PVC) material,. This product is available in North America, Europe or Asia Pacific region. The processing method is: profile extrusion molding. The main features of Vikalloy P40 are:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 41.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 100 | % | ASTM D638 |
| Flexural Modulus | 2520 | MPa | ASTM D790 |
| Flexural Strength | 68.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 430 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, not annealed | 75.6 | °C | ASTM D648 |
| 1.8 MPa, annealed | 81.1 | °C | ASTM D648 |
| Additional Information |
|---|
| Notched Izod Impact Resistance, ASTM D256, 73°F: 7 - 9 ft*lb/in |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 166 - 171 | °C | |
| Cylinder Zone 2 Temp. | 166 - 171 | °C | |
| Cylinder Zone 3 Temp. | 166 - 171 | °C | |
| Cylinder Zone 4 Temp. | 166 - 171 | °C | |
| Cylinder Zone 5 Temp. | 166 - 171 | °C | |
| Adapter Temperature | 171 - 177 | °C | |
| Die Temperature | 171 - 177 | °C |
| Extrusion instructions |
|---|
| Melt temperatures over 400°F should be avoided. Screw RPM's of 23 - 33 are typical. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3892 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| NANCAR® 1203LD | Nantex Industry Co., Ltd. | NBR | NANCAR® |
| DAI-EL™ LT-252 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| Ipethene® 470 | Carmel Olefins Ltd. | LDPE | Ipethene® |
| KMI PP KM-169IB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
