Order Products : sales@su-jiao.com
KRATON® G1654 H
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ggBIem_KRATON-G1654-H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton G1654 H is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below.
Kraton G1654 HS - supplied as a dusted powder Kraton G1654 H is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G1654 H in applications that must withstand weathering and high processing temperatures. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D4025 |
| Antioxidant Additive 1 | 0.040 to 0.10 | % | Internal Method |
| Polystyrene Content | 30 to 33 | % | Internal Method |
| Solution Viscosity - (Toluene) 10%wt (25°C) | 290 to 490 | mPa·s | |
| Total Extractables | < 1.6 | % | Internal Method |
| Volatile Matter | < 0.40 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 63 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | > 27.6 | MPa | Internal Method |
| Tensile Elongation (Break) | > 800 | % | Internal Method |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POPELEN HE-362M | Lotte Chemical Corporation | PP Impact Copolymer | POPELEN |
| ASTAMID™ MA3LK | Marplex Australia Pty. Ltd. | Nylon 66 | ASTAMID™ |
| Jackdaw PLA HW18NT6651 | Jackdaw Polymers | PLA | Jackdaw PLA |
| Lucky Enpla LAY1000 9309 | Lucky Enpla Co LTD | PC+ABS | Lucky Enpla |
| Sarlink® TPE RV-2240 | Teknor Apex Company | TPE | Sarlink® TPE |
