Order Products : sales@su-jiao.com
RTP ESD C 2800 B-55A
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gbymLy_RTP-ESD-C-2800-B-55A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.00 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 1.5 to 3.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain, 3.18 mm) | 2.07 | MPa | ASTM D412 |
| Tensile Strength 2(Break, 3.18 mm) | 5.52 | MPa | ASTM D412 |
| Tensile Elongation 3(Break, 3.18 mm) | 350 | % | ASTM D412 |
| Tear Strength 4 | 29.8 | kN/m | ASTM D624 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 5 | < 1.0E+5 | ohms | ASTM D257 |
| Volume Resistivity | < 1.0E+3 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 79.4 | °C | |
| Drying Time - Desiccant Dryer | 2.0 | hr | |
| Dew Point - Desiccant Dryer | -17.8 | °C | |
| Suggested Max Moisture | 0.030 | % | |
| Processing (Melt) Temp | 182 to 210 | °C | |
| Mold Temperature | 15.6 to 65.6 | °C | |
| Injection Pressure | 82.7 to 124 | MPa |
| Note Message | |
|---|---|
| 1 . | Die C, 510 mm/min |
| 2 . | Die C, 510 mm/min |
| 3 . | Die C, 510 mm/min |
| 4 . | Die C |
| 5 . | ESD STM11.11 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene MBB0092 | Teknor Apex Asia Pacific PTE. LTD. | PE, Unspecified | Sinpolene |
| TRIBOCOMP® PEEK CF30 TS0 | EPIC Polymers | PEEK | TRIBOCOMP® |
| Hanwha Total PP TB81W | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| Hypro® PP-RP 35/1.5C | Entec Polymers | PP Random Copolymer | Hypro® |
| OXNILON 6 ST 33GF | Oxford Polymers | Nylon 6 | OXNILON 6 |
