Order Products : sales@su-jiao.com
Braskem PP C780-07Z
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Braskem Europe GmbH |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gEHxux_Braskem-PP-C780-07Z.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Braskem C780-07Z Polypropylene Resin is a high performance impact copolymer developed for injection moulding applications. Braskem C780-07Z Polypropylene Resin offers an excellent balance of mechanical properties and processability and an outstanding long term heat stability. Applications for Braskem C780-07Z Polypropylene Resin:
Regulatory Information Braskem C780-07Z Polypropylene Resin should comply with EU, No 10/2011. It is the responsibility of the manufacturers of food contact articles and industrial food packers to make sure the articles in their actual use are in compliance with the imposed migration requirements. The appropriate regulations should be consulted for more detailed information. Compliance letters can be obtained through the Braskem sales representative. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 26.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 10 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C, Injection Molded | 6.0 | kJ/m² | |
| 0°C, Injection Molded | 7.5 | kJ/m² | |
| 23°C, Injection Molded | 12 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 88.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature 2 | 151 | °C | ISO 306/A |
| Accelerated Oven Ageing (150°C) | 1800 | hr | ISO 4577 |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| 2 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 6042-60A | RTP Company | TPE | RTP |
| Sylvin 8854-75FUV Yellow 4162 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Unichem 5012G-05 | Colorite Polymers | PVC, Flexible | Unichem |
| CALP 1450G | Lion Idemitsu Composites Co., Ltd. | Polyolefin, Unspecified | CALP |
| Indothene LL 36RA045 | Reliance Industries Limited | LLDPE | Indothene LL |
