Order Products : sales@su-jiao.com
OmniCarb™ PC/ABS 1220 CTI
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | OMNI Plastics, LLC |
| Trademark: | OmniCarb™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vOfkdh_OmniCarb-PC-ABS-1220-CTI.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Easy Flow, Cold Temperature Impact Resistant PC/ABS |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 20 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 57.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 130 | % | ASTM D638 |
| Flexural Modulus | 2350 | MPa | ASTM D790 |
| Flexural Strength | 88.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, 3.18 mm | 430 | J/m | |
| 23°C, 3.18 mm | 640 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 116 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.18 mm) | HB | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 249 to 288 | °C | |
| Middle Temperature | 254 to 299 | °C | |
| Front Temperature | 260 to 293 | °C | |
| Nozzle Temperature | 249 to 293 | °C | |
| Processing (Melt) Temp | 260 to 302 | °C | |
| Mold Temperature | 37.8 to 93.3 | °C | |
| Back Pressure | 0.345 to 0.689 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadraflex™ ALE-90A-B20 | Biomerics, LLC | TPU-Polyether | Quadraflex™ |
| TIPPLEN® H 483 F | MOL Petrochemicals Co. Ltd. | PP Homopolymer | TIPPLEN® |
| Novamid® 2430AH2 | DSM Engineering Plastics | Nylon 66/6 | Novamid® |
| ALKAMIX™ MB-UV815 | Marplex Australia Pty. Ltd. | PE, Unspecified | ALKAMIX™ |
| Kangxi® PC/ABSHI-50 | Wuxi Kangxi Plastics Technology Co.,Ltd. | PC+ABS | Kangxi® |
