Order Products : sales@su-jiao.com
Tenopom® POM A3 MF PRTA010 PR304
| Category: | Acetal (POM) Homopolymer , Acetal (POM) Homopolymer |
| Manufacturer: | Petropol Industry and Trade of Polymers LTDA |
| Trademark: | Tenopom® POM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ffgHCr_Tenopom-POM-A3-MF-PRTA010-PR304.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyacetal homopolymer medium viscosity, easy processing, suitable for injection. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/1.05 kg) | 5.0 to 7.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.8 to 2.1 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 67.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 41 | % | ASTM D638 |
| Flexural Modulus | 3150 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 73 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed | 165 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 0.250 mm | 100 | °C | ASTM D696 |
| Peak Melting Temperature | 177 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 2.0E+14 | ohms·cm | ASTM D257 |
| Dissipation Factor (1 MHz) | 5.0E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 210 to 220 | °C | |
| Mold Temperature | 80.0 to 90.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® CA RV300L 100 NAT | Radici Plastics | Nylon 66/6 | Radilon® |
| Radilon® S 40E 100 NAT | Radici Plastics | Nylon 6 | Radilon® |
| SOLLAMID B 2700 - B 2710 | Krisoll Resinas Plásticas Ltda. | Nylon 6 | SOLLAMID |
| SLOVAMID® 6 GF 25 LTS | Plastcom | Nylon 6 | SLOVAMID® 6 |
| POLYCOMPO PE 2100JH | POLYCOMPO Co.,Ltd. | HDPE | POLYCOMPO PE |
