Order Products : sales@su-jiao.com
Borealis PP RF926MO
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Borealis AG |
| Trademark: | Borealis PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ffCuAU_Borealis-PP-RF926MO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
RF926MO is a specially modified transparent polypropylene random copolymer with high meltflow. This grade is intended for injection blow stretch moulding (IBSM). and is designed for high-speed injection moulding and contains nucleating and demoulding additives. Products moulded from this grade exhibit excellent transparency, very good organoleptic properties, high impact at ambient temperature, relatively high stiffness, and good demoulding and antistatic properties. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.0 - 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 82 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1150 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 29.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 11 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 6.0 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 80.0 | °C | ISO 75-2/B |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | < 5.0 | % | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 - 260 | °C | |
| Mold Temperature | 30.0 - 40.0 | °C | |
| Injection Rate | Fast | ||
| Holding Pressure | 20.0 - 50.0 | MPa |
| Injection instructions |
|---|
| Blow pressure: 5 - 20 barReheat temperature: < 130 °CRF926MO can be processed on standard stretch blow moulding machines. |
| Note Message | |
|---|---|
| 1 . | Injection molded specimen |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 411 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| UBE Nylon 1030 B | UBE Engineering Plastics, S.A. | Nylon 6 | UBE Nylon |
| Nypol® PA A3 HL CNZ0263 NR387 | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
| Delrin® 100PE NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| HIFOR® LF1010AA | Westlake Chemical Corporation | LLDPE | HIFOR® |
