Order Products : sales@su-jiao.com

RELENE® 1005FY20

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Reliance Industries Limited
Trademark:	RELENE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	fUg7G5_RELENE-1005FY20.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
1005FY20 is a film grade Low Density Polyethylene (LDPE) produced by high pressure autoclave process. It has been specially formulated for the production of films for liquid milk packaging on full automatic form, fill and seal type of machines. Film produced from this grade exhibits good impact resistance and heat sealing characteristics. The incorporation of necessary additives in the polymer ensures good surface slip and smooth flow of film on packaging machines. It can be pigmented by using suitable food contact approved masterbatches. Films up to 40 micron in thickness can be processed easily from this grade.

Message

1005FY20 is a film grade Low Density Polyethylene (LDPE) produced by high pressure autoclave process. It has been specially formulated for the production of films for liquid milk packaging on full automatic form, fill and seal type of machines. Film produced from this grade exhibits good impact resistance and heat sealing characteristics. The incorporation of necessary additives in the polymer ensures good surface slip and smooth flow of film on packaging machines. It can be pigmented by using suitable food contact approved masterbatches. Films up to 40 micron in thickness can be processed easily from this grade.

General Information
Additive	Medium Slip
Features	Food Contact Acceptable Good Heat Seal Good Impact Resistance Medium Slip
Uses	Film Packaging
Agency Ratings	FDA 21 CFR 177.1520 IS 10141-1982 IS 10146-1982
Processing Method	Coextrusion Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.920	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.50	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D882
MD : Break, 40 µm, Blown Film	21.0	MPa
TD : Break, 40 µm, Blown Film	20.0	MPa
Tensile Elongation			ASTM D882
MD : Break, 40 µm, Blown Film	300	%
TD : Break, 40 µm, Blown Film	530	%
Dart Drop Impact (40 µm, Blown Film)	150	g	ASTM D1709A

Resin Grade	Manufacturer	Category	Trademark
Polymist® XPP 546	Solvay Specialty Polymers	PTFE	Polymist®
RTP 205 MS 2	RTP Company	Nylon 66	RTP
Daelim Po1y® LH-144	DAELIM INDUSTRIAL CO., LTD.	HDPE	Daelim Po1y®
Lucopren® SE 1522-55S	Lucobit AG	SEPS	Lucopren®
INEOS PP 100-CC60	INEOS Olefins & Polymers Europe	PP Homopolymer	INEOS PP