Order Products : sales@su-jiao.com
TECOLITE KM-757(J)
| Category: | Phenolic , Phenolic |
| Manufacturer: | KYOCERA Chemical Corporation |
| Trademark: | TECOLITE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eiIIYi_TECOLITE-KM-757-J-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Provides wide range moldability and Superior cost performance and Expands the possibility of design. Kyocera Chemical's Phenolic Molding Compounds "TECOLITE" can possible to high cycle molding and excellent stability within a cylinder. Moreover, "TECOLITE" have a wide molding condition and can be found out easily. In the parts, "TECOLITE" have small mold shrinkage factor therefore it is suitable for precision parts. It is especially the best for mass-production parts, such as a non-fuse breaker, various electric parts, and kitchen parts, etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | |
| Molding Shrinkage | |||
| Flow 1 | 1.2 to 1.4 | % | |
| Flow 2 | 0.70 to 0.90 | % | |
| Across Flow 3 | 0.90 to 1.1 | % | |
| Water Absorption (Equilibrium) | < 0.35 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Flexural Strength | 78.0 to 98.0 | MPa | |
| Compressive Strength | 216 to 245 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature | 170 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | |||
| After Boiling | 1.0E+8 to 1.0E+9 | ohms | |
| As Molded | 1.0E+9 to 1.0E+11 | ohms | |
| Dielectric Strength | > 8.0 | kV/mm |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.710 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Injection Molding |
| 2 . | Compression Molding |
| 3 . | Injection Molding |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIME TPO R110E | Prime Polymer Co., Ltd. | PP Impact Copolymer | PRIME TPO |
| Globalene® SI4201 | Lee Chang Yung Chemical Industry Corp. | PP Alloy | Globalene® |
| EMAC+® SP1330 | Westlake Chemical Corporation | EMA | EMAC+® |
| Grivory® XE 4216 black 9233 | EMS-GRIVORY | Nylon 6T/66 | Grivory® |
| Kemcor HD 2468 | Qenos Pty Ltd | HDPE Copolymer | Kemcor |
