Order Products : sales@su-jiao.com
UBE Polyethylene F022SE
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fhDOM1_UBE-Polyethylene-F022SE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UBE Polyethylene F022SE is a Polyethylene material. It is available in North America. Primary attribute of UBE Polyethylene F022SE: Antistatic. Typical application of UBE Polyethylene F022SE: Packaging |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 0.50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 20.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 750 | % | ASTM D638 |
| Apparent Bending Modulus | 170 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 96.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ASTALAC™ ABS M140 | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| Ateva® 1641 | Celanese EVA Performance Polymers | EVA | Ateva® |
| EPO-TEK® OE100-T | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| KPOL-LDPE LD K-8/918 | KPOL Chem Co. | LDPE | KPOL-LDPE |
| Plyophen 23041 | Durez Corporation | Phenolic | Plyophen |
