Order Products : sales@su-jiao.com
Selvol™ ULTALUX FA
| Category: | PVOH , Polyvinyl Alcohol |
| Manufacturer: | Sekisui Chemical Company, Ltd. |
| Trademark: | Selvol™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eZWE11_Selvol-ULTALUX-FA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SELVOL™ ULTALUX FA polyvinyl alcohol (PVOH) provides performance and functionality in face masks and peels, BB creams, anti-aging creams and lotions, deodorants/antiperspirants and scar treatment formulations. Ultalux FA offers a defined spectrum of performance attributes formulators require to manufacture select personal care products efficiently and effectively. As part of the Ultalux range of PVOH, the FA grade is tested for high quality and purity and is verified as non-irritating on skin. |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| pH - Of a 4% aqueous solution | 4.5 to 6.5 | ||
| Solution Viscosity - Of a 15% aqueous solution at 20ºC | 5.1 to 5.7 | Pa·s |
| Films | Nominal Value | Unit | |
|---|---|---|---|
| Adhesion to Glass | 80 to 120 | g |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Modulus 1 | 11.0 to 13.8 | MPa | |
| Tensile Strength 2 | 12.4 to 15.2 | MPa | |
| Tensile Elongation 3(Break) | > 200 | % |
| Note Message | |
|---|---|
| 1 . | Tensile properties and adhesion were measured on films containing 12% PVOH and 3% glycerin after casting and drying in a controlled temperature and humidity room for 24 hours |
| 2 . | Tensile properties and adhesion were measured on films containing 12% PVOH and 3% glycerin after casting and drying in a controlled temperature and humidity room for 24 hours |
| 3 . | Tensile properties and adhesion were measured on films containing 12% PVOH and 3% glycerin after casting and drying in a controlled temperature and humidity room for 24 hours |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® 8232G HS FR BK-102 | BASF Corporation | Nylon 6 | Ultramid® |
| ADDILENE H 490 M10 S | ADDIPLAST | PP, Unspecified | ADDILENE |
| ALCOM® PA66 910/1 GF30 PTFE15 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| Akulon® F160-Z | DSM Engineering Plastics | Nylon 6 | Akulon® |
| TECHNYL® C 230 NATURAL | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
