Order Products : sales@su-jiao.com
Cosmic DAP D44/6160
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Cosmic Plastics, Inc. |
| Trademark: | Cosmic DAP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bS9szr_Cosmic-DAP-D44-6160.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DESCRIPTION Cosmic D44 / 6160 is a mineral filled, special purpose diallyl ortho phthalate molding compound which is supplied in a free flowing granular form. It can be easily molded in compression, transfer, or injection equipment and can be readily preformed. FEATURES D44 / 6160 exceeds all mineral compounds available today in mechanical and electrical properties. It has an extremely low water absorption, high dielectric strength, and low dissipation factor along with high tensile strength, exceptional arc resistance and excellent resistance to high temperatures. APPLICATIONS Switches, terminals, insulators, housings, cups and cases where exposure to high humidity is encountered. Also useful for encapsulation of electrical and electronic components. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.74 | g/cm³ | |
| Bulk Factor | 2.3 | ||
| Molding Shrinkage - Flow | 0.30 to 0.70 | % | |
| Dimensional Stability | < 0.080 | % | |
| Water Absorption 1(Equilibrium, 50°C) | 0.40 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 31.0 to 41.4 | MPa | |
| Flexural Strength | 68.9 to 82.7 | MPa | |
| Compressive Strength | 138 to 193 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Notched Izod Impact | 19 to 27 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow (-40 to 100°C) | 4.5E-5 | cm/cm/°C | |
| Heat Distortion | 260 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Dielectric Breakdown | |||
| Dry | 54000 | V | |
| Wet | 48000 | V | |
| Surface Resistivity | |||
| -- 2 | 6.0E+9 | ohms | |
| -- 3 | > 1.0E+16 | ohms | |
| Volume Resistivity | |||
| -- 4 | 6.0E+9 | ohms·cm | |
| -- 5 | > 1.0E+16 | ohms·cm | |
| Dielectric Strength 6 | |||
| Dry | 15 | kV/mm | |
| Wet | 14 | kV/mm | |
| Dielectric Constant | |||
| 1 kHz 7 | 4.70 | ||
| 1 kHz 8 | 4.50 | ||
| 1 MHz 9 | 4.40 | ||
| 1 MHz 10 | 4.20 | ||
| Dissipation Factor | |||
| 1 kHz 11 | 0.010 | ||
| 1 kHz 12 | 9.0E-3 | ||
| 1 MHz 13 | 0.017 | ||
| 1 MHz 14 | 8.0E-3 | ||
| Arc Resistance | 135 | sec |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 135 to 190 | °C | |
| Injection Pressure | 3.45 to 55.2 | MPa |
| Note Message | |
|---|---|
| 1 . | 48 hrs |
| 2 . | 30 days @ 100% RH @ 70°C |
| 3 . | As Is |
| 4 . | 30 days @ 100% RH @ 70°C |
| 5 . | As Is |
| 6 . | Method B (Step-by-Step) |
| 7 . | Wet |
| 8 . | Dry |
| 9 . | Wet |
| 10 . | Dry |
| 11 . | Wet |
| 12 . | Dry |
| 13 . | Wet |
| 14 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vyncolit® RX®3-1-525F | Vyncolit N.V. | DAP | Vyncolit® |
| ULTEM™ AUT195 resin | SABIC Innovative Plastics | PEI+PCE | ULTEM™ |
| HiFill® PA6 GF15 IM1 | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| TECACOMP® PEEK TRM XG grey 4006 | Ensinger GmbH | PEEK | TECACOMP® |
| TOTAL Polystyrene Crystal 500W | TOTAL Refining & Chemicals | PS (GPPS) | TOTAL Polystyrene |
