Category: | PPE+PS , Polyphenylene Ether + PS |
Manufacturer: | SABIC Innovative Plastics Asia Pacific |
Trademark: | NORYL™ |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | eUxD1w_NORYL-EN95-resin.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Low heat, extrusion grade PPO/HIPS alloy. |
General Information | |
---|---|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
Molding Shrinkage - Flow (3.20 mm) | 0.50 to 0.70 | % | Internal Method |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength 1(Yield) | 45.0 | MPa | ASTM D638 |
Tensile Elongation 2(Break) | 50 | % | ASTM D638 |
Flexural Modulus 3(50.0 mm Span) | 2300 | MPa | ASTM D790 |
Flexural Strength 4(Yield, 50.0 mm Span) | 75.0 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact (23°C) | 280 | J/m | ASTM D256 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Deflection Temperature Under Load | ASTM D648 | ||
1.8 MPa, Unannealed, 3.20 mm | 100 | °C | |
1.8 MPa, Unannealed, 6.40 mm | 108 | °C |
Injection | Nominal Value | Unit | |
---|---|---|---|
Drying Temperature | 100 to 105 | °C | |
Drying Time | 2.0 to 4.0 | hr | |
Drying Time, Maximum | 8.0 | hr | |
Processing (Melt) Temp | 210 to 230 | °C |
Note Message | |
---|---|
1 . | Type I, 50 mm/min |
2 . | Type I, 50 mm/min |
3 . | 1.3 mm/min |
4 . | 1.3 mm/min |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Ultracast™ AP Blue Label | Hapco Inc. | Epoxy | Ultracast™ |
GLAMIDE® T-456 | TOYOBO America, Inc. | Nylon 66 | GLAMIDE® |
Hipolyene 3080 HC RM | Zylog Plastalloys | TPO (POE) | Hipolyene |
ISPLEN® PB 199 A3M | REPSOL | PP Impact Copolymer | ISPLEN® |
Sumiliteresin® PR-50069 | SBHPP | Phenolic | Sumiliteresin® |