Order Products : sales@su-jiao.com
THERMOLAST® A TA6AOZ (Series: UV/AD1)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KRAIBURG TPE |
| Trademark: | THERMOLAST® A |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eTIAHq_THERMOLAST-A-TA6AOZ-Series-UV-AD1-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The UV/AD1 Series is your material solution for applications requiring a high UV resistance and adhesion to polar thermoplastics such as PC, ABS, PC/ABS. It is particularly appropriate for automotive exterior components. Typical applications
Material advantages
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.15 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 59 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield) | 3.50 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 550 | % | ISO 37 |
| Tear Strength 3 | 16 | kN/m | ISO 34-1 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Adhesion to ABS | 5.5 | kN/m | Renault D41/1916 |
| Adhesion to PC | 6.0 | kN/m | Renault D41/1916 |
| Adhesion to PC/ABS | 4.0 | kN/m | Renault D41/1916 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 180 | °C | |
| Cylinder Zone 3 Temp. | 200 | °C | |
| Die Temperature | 220 | °C |
| Note Message | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| 3 . | Method Bb, Angle (Nicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 141 HI | RTP Company | PP, Unspecified | RTP |
| Moplen EP649N | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| VITAMIDE® BR15OR6337 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| Ethavin™ 75 FRE | Vi-Chem Corporation | TPO (POE) | Ethavin™ |
| OTECH TPR OTR3505-Insoles | OTECH Corporation | TPE | OTECH TPR |
