Order Products : sales@su-jiao.com
Generic MMBS
| Category: | MMBS , Methyl Methacrylate Butadiene Styrene |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | eT1RU8_Generic-MMBS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic MMBS This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 - 1.07 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 4.9 - 5.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 61 - 95 | ASTM D785 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 21 - 590 | J/m | ASTM D256 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance | 89.0 - 91.0 | % | ASTM D1003 |
| Haze | 1.5 - 2.0 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.0 - 75.0 | °C | |
| Drying Time | 2.0 - 2.5 | hr | |
| Rear Temperature | 195 - 197 | °C | |
| Middle Temperature | 200 - 203 | °C | |
| Front Temperature | 207 - 208 | °C | |
| Mold Temperature | 40.5 - 55.0 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic MMBSThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2109 | RTP Company | PEI | RTP |
| Sanren F200 (On-spec.) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| ALTECH® PA6 B 2015/100 GF15 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Andur 2-92 AP/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| Rotuba CAB B902 (22% Plasticizer) | Rotuba Extruders, Inc. | CAB | Rotuba CAB |
