| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dFr4vm_RTP-2700-85A.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. -Preliminary Product Data per RTP Co.- |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.998 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.40 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 7.93 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 10 | % | ASTM D638 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | 0.030 | % | |
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 163 to 232 | °C | |
| Middle Temperature | 163 to 232 | °C | |
| Front Temperature | 163 to 232 | °C | |
| Mold Temperature | 15.6 to 65.6 | °C | |
| Injection Pressure | 34.5 to 103 | MPa | |
| Back Pressure | 0.345 | MPa | |
| Clamp Tonnage | 4.1 to 8.3 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Teflon® PTFE 60 X | DuPont Fluoropolymers | PTFE | Teflon® PTFE |
| Sinvicomp SZF5009C | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| NORYL GTX™ NX0031 resin | SABIC Innovative Plastics | PPE+PS+Nylon | NORYL GTX™ |
| Evoprene™ 025 | AlphaGary | SBS | Evoprene™ |
| EMERGE™ PC 8230-20 | Trinseo | PC | EMERGE™ |