Order Products : sales@su-jiao.com
HONES® PPS HS-CT15-G
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Guangdong Shunde Hones Polymer Material Co., Ltd. |
| Trademark: | HONES® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cxFNKx_HONES-PPS-HS-CT15-G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Special grade of carbon fiber reinforced |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| UL File Number |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.55 | g/cm³ | Internal Method |
| Molding Shrinkage | Internal Method | ||
| Flow : 2.00 mm | 0.15 | % | |
| Across Flow : 2.00 mm | 0.30 | % | |
| Water Absorption (23°C, 24 hr) | 0.020 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 160 | MPa | Internal Method |
| Tensile Elongation (Break) | 1.2 | % | Internal Method |
| Flexural Modulus | 9000 | MPa | Internal Method |
| Flexural Strength | 210 | MPa | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 260 | °C | Internal Method |
| CLTE | ISO 11359-2 | ||
| Flow | 1.0E-5 | cm/cm/°C | |
| Transverse | 4.0E-5 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.5E+2 | ohms | IEC 60093 |
| Volume Resistivity | 3.0E+2 | ohms·cm | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (310°C) | 300 | Pa·s | ISO 11443 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bergamid™ B70 G25 BK034 | PolyOne Corporation | Nylon 6 | Bergamid™ |
| Evermore PUR SS-302P | Evermore Chemical Industry Co., Ltd. | PUR, Unspecified | Evermore PUR |
| ExxonMobil™ HDPE HYA 600 | ExxonMobil Chemical | HDPE, UHMW | ExxonMobil™ HDPE |
| PLUSTEK RB306G6 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
| SEQUEL® 1714-1 FP BLK | LyondellBasell Industries | PP, Unspecified | SEQUEL® |
