Order Products : sales@su-jiao.com
ESENTTIA 01R25
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Polipropileno del Caribe S.A. |
| Trademark: | ESENTTIA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | coLtGn_ESENTTIA-01R25.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Characteristics: Low melt flow rate high ethylene level Random copolymer polypropylene, very good impact. Recommended for: Extrusion blow molding containers; co-extruded blown films; extrusion of strapping, Cartonplast; sheet extrusion and Solid Pressure Phase Forming of containers that require clarity and very good impact resistance, pure or blended with homopolymer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 0.80 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, 3.20 mm, Injection Molded) | 24.1 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, 3.20 mm, Injection Molded) | 14 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(3.20 mm, Injection Molded) | 793 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 130 | J/m | ASTM D256A |
| Gardner Impact 5(23°C, 3.20 mm, Injection Molded) | 30.5 | J | ASTM D5420 |
| Note Message | |
|---|---|
| 1 . | Procedure B |
| 2 . | Type I, 50 mm/min |
| 3 . | Type I, 50 mm/min |
| 4 . | Type I, 1.3 mm/min |
| 5 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYPRO® 5014L AS310 | YUHWA Korea Petrochemical Ind. Co., Ltd. | PP Homopolymer | POLYPRO® |
| TECHNO ABS F5450 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
| ADDILENE J 490 M20 F | ADDIPLAST | PP, Unspecified | ADDILENE |
| Fluoroplex R 25 - GMA | UNIFLON | PTFE | Fluoroplex |
| Elastollan® B 60 A ESD M | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
