Order Products : sales@su-jiao.com

Alathon® L5008HP

Category:	HDPE, HMW , High Density (HMW) Polyethylene
Manufacturer:	LyondellBasell Industries
Trademark:	Alathon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	cUxr6z_Alathon-L5008HP.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Alathon L5008HP is a bimodal, high molecular weight, high density polyethylene resin with excellent processing characteristics. L5008HP is selected by customers for pressure pipe applications including industrial piping, mining, oil & gas gathering, municipal water service lines and sewers. When L5008HP is combined with an Equistar approved black at the correct loading, this compound meets the following standards:

Plastics Pipe Institute (PPI) PE 4710 per PPI TR-3

ASTM D3350 Cell Classification PE445574C

Chemical Resistance per ASTM D2513

NSF Standard 14 and Standard 61 for Potable Water Pipe and Fittings

NSF Standard 358-1 for PE Pipe and Fittings for "Geothermal" Heat Pump Systems

General Information
Features	Bimodal Molecular Weight Distribution Copolymer Good Chemical Resistance Good Processability High Density High Molecular Weight
Uses	Piping
Agency Ratings	ASTM D 2513 ASTM D 3350 PE445574C NSF 14 NSF 358-1 NSF 61 PPI PE-4710 PPI TR-3 PPI TR-4
Forms	Pellets
Processing Method	Extrusion Pipe Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.949	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg	0.070	g/10 min
190°C/21.6 kg	16	g/10 min

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	24.4	MPa
Break	34.3	MPa
Tensile Elongation (Break)	640	%	ASTM D638
Flexural Modulus - 2% Secant	972	MPa	ASTM D790
Hydrostatic Design Basis			ASTM D2837
23°C	11.0	MPa
60°C	6.89	MPa

Additional Information	Nominal Value	Unit	Test Method
DSC Induction Temperature	267	°C	ASTM D3350
PENT (80°C) ¹	> 500	hr	ASTM F1473

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	68.0	°C	ASTM D648

Note Message
1 .	2.4 MPa

Resin Grade	Manufacturer	Category	Trademark
Maxelast® P2875	Nantong Polymax Elastomer Technology, Co., Ltd	TPE	Maxelast®
RTP 203 RC HS Black	RTP Company	Nylon 66	RTP
BMC HT12-1026	Bulk Molding Compounds, Inc.	Polyester, TS	BMC
DURANEX® 7390W	Polyplastics Co., Ltd.	PBT	DURANEX®
PETILEN YY B 0153	PETKIM Petrokimya Holding A.S.	HDPE	PETILEN