Order Products : sales@su-jiao.com
NYCOA Polyamide 715
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cUqwZD_NYCOA-Polyamide-715.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 715 is an unextracted, medium - high viscosity Nylon 6 resin for extrusion processing. The medium - high viscosity of the resin makes it suitable for tubing, complex profile extrusion, mandrel extrusion applications. NYCOA 715 is available with custom additive packages: heat stabilizer, UV stabilizer, flame retardant and/or custom colors. Typical applications include profile extrusion, flexible tubing, and mandrels. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 2.0 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 50.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 200 | % | ASTM D638 |
| Flexural Modulus 3 | 793 | MPa | ASTM D790 |
| Flexural Strength 4 | 34.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 163 | °C | ASTM D648 |
| Melting Temperature | 221 | °C | DSC |
| Additional Information |
|---|
| The value listed as Melting Point DSC, was tested in accordance with ASTM D789.Relative Viscosity, NYCOA method: 4.0 to 4.4 SAVWater Extracable, NYCOA method: 8 to10%Tensile Elongation at Break, ASTM D638, 2 in/min: 200+% |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| tefanyl® VE VEIP 215 | Mitsubishi Chemical Performance Polymers, Inc. | PVC+NBR | tefanyl® VE |
| Silamid® E | Roonamid a.s. | Nylon 6 | Silamid® |
| Alkathene® Ultra LDD203 | Qenos Pty Ltd | LLDPE | Alkathene® Ultra |
| DJSilicone NE--E-2/NE-E-2U | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| LNP™ THERMOTUF™ V1000SU compound | SABIC Innovative Plastics | Nylon, Unspecified | LNP™ THERMOTUF™ |
