Order Products : sales@su-jiao.com
Latamid 66 E21 G/15
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | LATI S.p.A. |
| Trademark: | Latamid |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cRKWz4_Latamid-66-E21-G-15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Compound based on Polyamide 66 (PA 66). Toughened. Glass fibres. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.14 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | ||
| Across Flow : 2.00 mm | 1.0 to 1.3 | % | |
| Flow : 2.00 mm | 0.50 to 0.80 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-2/1 | ||
| 23°C | 4800 | MPa | |
| 60°C | 3400 | MPa | |
| 90°C | 2500 | MPa | |
| 120°C | 1900 | MPa | |
| 150°C | 1700 | MPa | |
| Tensile Stress | ISO 527-2/5 | ||
| Yield, 23°C | 95.0 | MPa | |
| Yield, 60°C | 70.0 | MPa | |
| Yield, 90°C | 55.0 | MPa | |
| Yield, 120°C | 45.0 | MPa | |
| Yield, 150°C | 35.0 | MPa | |
| Break, 23°C | 90.0 | MPa | |
| Break, 60°C | 65.0 | MPa | |
| Break, 90°C | 45.0 | MPa | |
| Break, 120°C | 35.0 | MPa | |
| Break, 150°C | 30.0 | MPa | |
| Tensile Strain | ISO 527-2/5 | ||
| Yield, 23°C | 3.0 | % | |
| Yield, 60°C | 4.8 | % | |
| Yield, 90°C | 6.0 | % | |
| Yield, 120°C | 7.0 | % | |
| Yield, 150°C | 7.0 | % | |
| Break, 23°C | 5.0 | % | |
| Break, 60°C | 7.0 | % | |
| Break, 90°C | 9.0 | % | |
| Break, 120°C | 9.0 | % | |
| Break, 150°C | 10 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 10 | kJ/m² | |
| -20°C | 15 | kJ/m² | |
| 23°C | 20 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | 85 | kJ/m² | |
| -20°C | 80 | kJ/m² | |
| 23°C | 75 | kJ/m² | |
| Notched Izod Impact | ASTM D256A | ||
| -20°C, 3.20 mm | 140 | J/m | |
| 23°C, 3.20 mm | 200 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 255 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 230 | °C | ISO 75-2/A |
| Continuous Use Temperature 2 | 90.0 | °C | |
| Vicat Softening Temperature | 230 | °C | ISO 306/B50 |
| CLTE - Flow (30 to 100°C) | 3.0E-5 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 to 100 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 260 to 290 | °C | |
| Mold Temperature | 60.0 to 80.0 | °C | |
| Injection Rate | Moderate |
| Note Message | |
|---|---|
| 1 . | at 60 Mpa of cavity pressure |
| 2 . | 20,000 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXTEL® 620-BK | MRC Polymers, Inc. | PP Copolymer | MAXTEL® |
| S&E Wire & Cable GTPO8280 NATURAL | S&E Specialty Polymers, LLC | TPO (POE) | S&E Wire & Cable |
| Kemcor HD 3103 | Qenos Pty Ltd | HDPE, HMW | Kemcor |
| Hylac® GP74G30 | Ravago Manufacturing Americas, LLC | ABS | Hylac® |
| Sylvin 9772-75 Brown 7211 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
