Order Products : sales@su-jiao.com

POTICON OB43

Category:	PPE , Polyphenylene Ether
Manufacturer:	Otsuka Chemical Co., Ltd.
Trademark:	POTICON
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	XxVR5Q_POTICONOB43.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The Poticon series features a potassium titanate micro-filler compounded in thermoplastic resins to provide outstanding micro-reinforcement and dimensional stability. The excellent surface smoothness of these compounds limits friction toward opposing materials, reducing wear and allowing for greaseless applications. Moreover, as Poticon diminishes damage toward the mold and metal die and offers excellent recyclability, it also decreases processing costs.

Advantages

Microscopic reinforcement

Superior friction sliding and wear reduction

Excellent dimensional accuracy and surface smoothness

Highly recyclable

Applications

Automotive Parts (gears, bearings)

LED Reflectors

Watch Parts (gears, ground plane)

Camera (image stabilization parts)

Sliding Parts (gears, wheel bearing)

Camera Module Parts

Motor Parts (cog-wheels, bearings)

OB43 Property: Low waste, Conductive property

General Information
Features	High Dimensional Stability Conductivity Low friction coefficient Recyclable materials
Uses	LEDs Gear Application in Automobile Field Camera application Bearing
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.16	g/cm³	ASTM D792
Molding Shrinkage
Flow	0.60	%
Transverse flow	1.0	%
Water Absorption (Equilibrium)	0.10	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	80.0	MPa	ASTM D638
Tensile Elongation (Break)	4.5	%	ASTM D638
Flexural Modulus	4000	MPa	ASTM D790
Flexural Strength	125	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	30	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
CLTE - Flow	4.7E-5	cm/cm/°C	ASTM D696
Heat Distortion	160	°C	ASTM D648

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+7	ohms·cm	ASTM D257

Injection	Nominal Value	Unit
Processing (Melt) Temp	250 - 320	°C
Mold Temperature	60 - 100	°C
Injection Pressure	70.0 - 120	MPa

Resin Grade	Manufacturer	Category	Trademark
Rilsan® AZM 23 T6LD	Arkema	Nylon 12	Rilsan®
Maxxam™ PPC-40C Nat	PolyOne Corporation	PP Copolymer	Maxxam™
RheTech Thermoplastic Polyolefin FT7016-01	RheTech, Inc.	Polyolefin, Unspecified	RheTech Thermoplastic Polyolefin
TOTAL Polypropylene PPH 3860X	TOTAL Refining & Chemicals	PP Homopolymer	TOTAL Polypropylene
BUPLEN® 6531	LUKOIL Bulgaria Ltd.	PP Homopolymer	BUPLEN®