Order Products : sales@su-jiao.com
Flexalloy® OR 9800-45
| Category: | PVC Elastomer , Polyvinyl Chloride Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Flexalloy® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KU3nsK_Flexalloy-OR-9800-45.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Flexalloy®OR 9800-45 is a polyvinyl chloride elastomer (PVC elastomer) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. Flexalloy®The main features of OR 9800-45 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 45 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 5.72 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 360 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compression Set (70°C, 22 hr) | 36 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 90.0 | °C | ASTM D794 |
| Brittleness Temperature | -51.0 | °C | ASTM D746 |
| Additional Information |
|---|
| 伸长保持率，油浸，ASTM 3号油，125°C，7天：73%拉伸强度保持率，油浸，ASTM 3号油，125°C，7天：110%膨胀，油浸，ASTM 3号油，125°C，7天：1.3%动态热稳定性，205°C：>60分钟 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 800 AR 15 TFE 13 SI 2 | RTP Company | Acetal (POM) Copolymer | RTP |
| NatureFlex™ 22D-NE | Innovia Films Ltd. | Cellulose, Regenerated | NatureFlex™ |
| ALCOM® PC 740/4 WT1281-10LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Estane® CP80AS2 TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Estane® |
| Geon™ Vinyl Fittings M1015 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Fittings |
