Order Products : sales@su-jiao.com
Andur 2-920 AP/Curene® 442
| Category: | PUR-Est/eth,TDI , Polyurethane (Polyester/Polyether mix, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cNqlRR_Andur-2-920-AP-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 2-920AP is a polyester/polyether TDI terminated coprepolymer suitable for the preparation of urethane elastomers. When cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)], an elastomer with 92 Shore A hardness will be produced. Elastomers of lower hardness can be obtained using blends of Curene 442 and polyols and other diamine curatives, or by the use of plasticizers. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 92 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 8.89 | MPa | ASTM D412 |
| 300% strain | 17.7 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 59.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 430 | % | ASTM D412 |
| Compression Set | 33 | % | ASTM D395B |
| Bayshore Resilience | 32 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 6.0 - 7.0 | min | |
| Demold Time (104°C) | 25 | min | |
| Post Cure Time | |||
| 22°C | 72 | hr | |
| 100°C | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 90 to 94Die C Tear, ASTM D1004: 423 pliAverage Split Tear, ASTM D1938: 174 pliMix Temperature: Andur 2-920 AP: 180-190°F Curene 442: 230°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Scolefin 42 T 13-8 | Ravago Group | PP Homopolymer | Scolefin |
| Zytel® 70G33HS1L NC010 | DuPont Performance Polymers | Nylon 66 | Zytel® |
| Altuglas® BS 440 | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® |
| ELASTOSIL® LR 3003/50 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| POLYfill PP 150ENH | Polykemi AB | PP, Unspecified | POLYfill |
