Order Products : sales@su-jiao.com
EGYPTENE HD 5301 FB
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Sidpec (Sidi Kerir Petrochemicals Co.) |
| Trademark: | EGYPTENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bi85Xn_EGYPTENE-HD-5301-FB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HD 5301 FB is a high density polyethylene grade with a broad molecular weight distribution. This grade has been especially developed for the production of very thin film with high tensile strength and stiffness. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ISO 1872-1 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.050 | g/10 min | ISO 1133 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 1184 | ||
| MD : Yield | 32.0 | MPa | ISO 1184 |
| TD : Yield | 29.0 | MPa | ISO 1184 |
| MD : Fracture | 57.0 | MPa | ISO 1184 |
| TD : Fracture | 65.0 | MPa | ISO 1184 |
| Tensile Elongation | ISO 1184 | ||
| MD : Fracture | 450 | % | ISO 1184 |
| TD : Fracture | 400 | % | ISO 1184 |
| Dart Drop Impact | 130 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 20 | g | ASTM D1922 |
| TD : 25 µm | 28 | g | ASTM D1922 |
| Additional Information |
|---|
| Film properties were measured on 15 micron film extruded at a blow up ratio 5:1. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANAMID 6 B11^ | Polykemi AB | Nylon 6 | SCANAMID 6 |
| Zytel® HTN 51G45HSL NC010 | DuPont Performance Polymers | PPA | Zytel® HTN |
| HiFill® PA6 GM40 L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| MAXATEL® AH800AVL-NAT | Pier One Polymers, Inc. | Acetal (POM) Homopolymer | MAXATEL® |
| MAXAMID™ EPDM036-BK | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
