Order Products : sales@su-jiao.com

Pinnacle PP 1512I

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	argtAg_Pinnacle-PP-1512I.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
11 MELT FLOW HOMOPOLYMER FOR FIBER SPINNING Pinnacle Polymers Polypropylene 1512I is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This product is intended for fiber spinning and other critical extrusion applications. The 1512I product provides: Excellent color processing stability Superior fiber spinning characteristics Resistance to gas fading Enhanced fiber resiliency Excellent lot-to-lot consistency Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetics Act of 1938.

Message

11 MELT FLOW HOMOPOLYMER FOR FIBER SPINNING

Pinnacle Polymers Polypropylene 1512I is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for fiber spinning and other critical extrusion applications.

The 1512I product provides:

Excellent color processing stability

Superior fiber spinning characteristics

Resistance to gas fading

Enhanced fiber resiliency

Excellent lot-to-lot consistency

Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetics Act of 1938.

General Information
Features	Food Contact Acceptable Gas-fading Resistant Good Color Stability Good Processing Stability Homopolymer Resilient
Uses	Fibers
Agency Ratings	FDA 21 CFR 177.1520(c) 1.1a
Forms	Pellets
Processing Method	Extrusion Fiber (Spinning) Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	11	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	34.5	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	9.0	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1660	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	32	J/m	ASTM D256

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I

Resin Grade	Manufacturer	Category	Trademark
FHR Polypropylene P4C6B-194	Flint Hills Resources, LP	PP Homopolymer	FHR Polypropylene
ESPRENE EPDM 400	Sumitomo Chemical Co., Ltd.	EPDM	ESPRENE EPDM
Huafon HF-4390A	Huafon Group Co., Ltd.	TPU-Polyether	Huafon
Hylon® N2000STL	Ravago Manufacturing Americas, LLC	Nylon 6	Hylon®
INEOS PP 100-CB25	INEOS Olefins & Polymers Europe	PP Homopolymer	INEOS PP