Order Products : sales@su-jiao.com
Glastherm® S
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glastherm® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | a3saIt_Glastherm-S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GlasTherm Grade S is a general purpose insulation sheet with an economical combination of thermal and physical properties. Grade S is recommended for processes where the continuous operating temperature does not exceed 425°F. It is completely asbestos-free and rugged to withstand rough handling during installation. It is easily cut and machined with standard metal working equipment. Diamond cutting tools are recommended for long life. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.84 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.40 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 94 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strength (Yield) | 124 | MPa | ASTM D790 |
| Compressive Modulus | 12400 | MPa | ASTM D695 |
| Compressive Strength | ASTM D695 | ||
| 200°C | 79.3 | MPa | ASTM D695 |
| 150°C | 110 | MPa | ASTM D695 |
| 24°C | 310 | MPa | ASTM D695 |
| 288°C | 68.9 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 430 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Linear thermal expansion coefficient | ASTM D696 | ||
| Flow | 1.1E-5 | cm/cm/°C | ASTM D696 |
| Lateral | 7.0E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.69 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1(in Air) | 2.0 | kV/mm | ASTM D149 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (23.9 mm) | HB | UL 94 |
| Additional Information |
|---|
| Maximum Service Temperature: 425°FThickness Tolerance: .002 inches |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL STAR™ AF 218 V40 BLACK 21N | Solvay Engineering Plastics | Nylon 66 | TECHNYL STAR™ |
| VENYL SG400 - 8229 | AD majoris | Nylon 6 | VENYL |
| GAPEX® APP30GP06GY | Ferro Corporation | PP Homopolymer | GAPEX® |
| Sylvin 9077-90 Grey 9525 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sylvin 9077-90 Grey 9569 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
