Order Products : sales@su-jiao.com
Epoxies, Ect. 10-3062
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxies, Etc. |
| Trademark: | Epoxies, Ect. |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZypVOH_Epoxies-Ect-10-3062.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
10-3062 is a room temperature curing, two component, epoxy potting compound and adhesive. The 10-3062 provides good water resistance, adhesion, and toughness. It is packaged in the convenient TriggerBond® dual barrel cartridge system. The 10-3062 Epoxy System meets the Food and Drug Administration (FDA) regulations permitting use in "indirect" food contact applications. The raw materials used in the products comply with the FDA regulations of Title 21 Code of Federal Regulations under Sections 175.105 and 175.300. Benefits:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Flexural Modulus | 2.14 | MPa | |
| Flexural Strength | 95.1 | MPa |
| Films | Nominal Value | Unit | |
|---|---|---|---|
| Peel Strength 1 | 1050 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Mix Viscosity (25°C) | 24000 | cP |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | |||
| -- 2 | Amber | ||
| -- 3 | Clear/Transparent | ||
| Mix Ratio by Volume (PBV) | |||
| Part A | 100 | ||
| Part B | 50 | ||
| Density (25°C) | 1.09 | g/cm³ | |
| Curing Time | |||
| 104°C | 0.25 | hr | |
| 66°C | 1.0 | hr | |
| 25°C | 24 | hr | |
| Pot Life 4(25°C) | 80 | min | |
| Shelf Life (10°C) | 12 | month |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore D) | 82 | ||
| Tensile Strength | 57.2 | MPa | |
| Tensile Elongation at Break | 4.9 | % | |
| Compression Strength | 228 | MPa | |
| Relative Permittivity (120 Hz) | 2.70 | ||
| Volume Resistivity | 1.7E+15 | ohms·cm | |
| Dissipation Factor (120 Hz) | 3.0E-3 |
| Note Message | |
|---|---|
| 1 . | Steel |
| 2 . | Part B |
| 3 . | Part A |
| 4 . | 100 grams |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TATREN® IM 6 56 | Slovnaft Petrochemicals, s.r.o. | PP Impact Copolymer | TATREN® |
| ACCUTECH™ HP0334G10M20CL | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| Andur 6500 DP/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| CYCOLAC™ MG29 resin | SABIC Innovative Plastics | ABS | CYCOLAC™ |
| Lanufene LLF 183N | Ras Lanuf Oil & Gas Processing Company (RASCO) | LLDPE | Lanufene |
