Order Products : sales@su-jiao.com
KMI PP KM-011BB
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | KMI PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZV5GFy_KMIPPKM011BB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KM-011BB is the block HIPP for sheet and thermoforming applications. KMI impact polypropylene shows an excellent balance between stiffness and impact strength at low temperatures as well as good processability. Food Contact Application: KM-011BB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact. Characteristics:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 82 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 29.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 500 | % | ASTM D638 |
| Flexural Modulus | 1270 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Distortion | 110 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2585 HEC | RTP Company | PC+ABS | RTP |
| 4PROP® 9C11120 XHFR1 | 4Plas | PP Copolymer | 4PROP® |
| DINAPLEN® PPH1S05 M403 H-4166 | Grupo Repol | PP Homopolymer | DINAPLEN® |
| MAJORIS FT303 - 1451 | AD majoris | PP, Unspecified | MAJORIS |
| OTECH PVC OW938LT - Cable Jacket | OTECH Corporation | PVC, Unspecified | OTECH PVC |
