Order Products : sales@su-jiao.com
Andur 90 AP
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 40OxVP_Andur-90-AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 90-AP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 90 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or by the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 1720 | cP | ASTM D2393 |
| 100°C | 525 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 4 to 4.4%Specific Gravity, ASTM D792, 77°F: 1.06 g/mlSpecific Gravity, ASTM D792, 212°F: 1.025 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MTEGRITY™ LDPE LD300 | M. Holland Company | LDPE | MTEGRITY™ LDPE |
| VICTREX® HT™ P22 | Victrex plc | PEK | VICTREX® HT™ |
| ALFATER XL® A90E 1GP0000 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
| Duratron® T4301 (EXTRUSION) | Quadrant Engineering Plastic Products | PAI | Duratron® |
| ELASTOSIL® A 316 | Wacker Chemie AG | Silicone | ELASTOSIL® A |
